Pelco CC3610 series, Installation & Operation Manual

Pelco Manual C2914M-F (08/05)         

[ 15 ]

Switch Settings

NOTE: 

Under most conditions, no setting of switches will be required. Please read the details of each switch

before making any adjustments.

AGC (Automatic Gain Control) - 

Switch Setting 1

Automatically adjusts the image to compensate for low levels of illumination. Choose
between the following settings:
ON (Default setting) - Enables the AGC mode.
OFF - Disables the AGC mode.

ESC (Electronic Shutter Control) - 

Switch Setting 2

The ESC feature compensates for an excessive light level by automatically adjusting
the shutter speed. Choose between the following settings:
ON

- Enables the Electronic Shutter Control mode.

OFF

(Default setting) - Disables the Electronic Shutter Control mode.

BLC (Backlight Compensation) - 

Switch Setting 3

The BLC (Backlight Compensation) feature compensates for backlit scenes by
enhancing objects in the center of the scene that would previously have been in
silhouette. BLC will only function with a manual iris lens when the Electronic Shutter
Control feature is switched on. For direct drive and auto iris lenses, BLC will still  func-
tion even though the Electronic Shutter Control feature is switched off. Choose between
the following settings:
ON

- Enables the BLC mode.

OFF (Default setting) - Disables the BLC mode.

Figure 8.  Switch Settings

(White indicates default switch position.)