EN 18
OPERATING THE GAS HOB
Ignition and adjustment
A symbol above the control knob indicates which burner is being
operated. Each burner is fully adjustable between high and low setting.
Spark ignition
Push in the control knob and turn it to the left to the high setting.
The burner will ignite.
▷
The control knob should be pushed in and held for about
10 seconds because of the flame failure device.
Flame failure device
Your gas hob has a flame failure device. This ensures that the gas
supply is shut off if the flame stops burning during cooking.
If the burner fails to ignite or stops burning, check the following:
• are the burner cap and burner ring seated correctly in the burner
housing;
• are the burner/spark plug and thermocouple clean and dry.
0 position
High setting with
spark ignition
Low setting
Burner zone
Summary of Contents for NF960MAT
Page 1: ...Handleiding Fornuis Manual Cooker NF960RVS NF960MAT ...
Page 32: ...NL 32 ...
Page 62: ...EN 32 ...
Page 63: ...EN 33 ...