17
623953
OPEN DOOR ALARM
An alarm signal sounds when a door is
open for too long.
Stopping the alarm
1. Close the door.
- The alarm will stop sounding.
HIGH TEMPERATURE ALARM
If you only switch off the alarm by touching the
A
key, the alarm will
switch on again after some time because the door is still open.
!
A signal will sound when the temperature in the appliance is too high.
Furthermore, symbol
D
shown in the display will flash. A high temperature can
be caused for several reasons:
•
The door has been opened for too long or too frequently.
•
The door does not seal properly.
•
Too much fresh food has been put in at the same time.
Every time the appliance is switched on again, it takes a while until the
correct temperature is reached. For this reason, the alarm is disabled
for the first 24 hours after the appliance is switched on to prevent the
unnecessary activation of the alarm.
!
Stopping the alarm
1. Touch the
A
key to stop the alarm.
- The alarm will stop sounding.
-
Symbol
D
shown in the display
continues to flash while the
temperature is still too high.
When the alarm is not stopped manually and the temperature remains
too high, the signal will sound for the first minutes of every half hour and
when the door is opened.
!
When you press the
A
key for the first time, the alarm will be
acknowledged and turned off. When you press the
A
key again, it will
already work as a settings adjustment key.
i
Summary of Contents for PKS25178
Page 1: ...Instructions for use Built in refrigerator PKS5178 PKS25178 ...
Page 29: ...29 623953 ...
Page 30: ...30 623953 ...
Page 31: ......