Pelican TA1 Installation Manual Download

Page: 2 / 4

The TA1 sensor requires 3-wires for power and communcation with a TS200(H); as shown

in the diagram above. In many situations you will be able to simply mount the TA1 sensor

on a wall and use the provided 10K internal temperature sensor to detect the temperature

at the desired location.

Follow the guide on page 3 for alternate installation options for the TA1 sensor. The TA1

sensor can be installed at a maximum distance of 500' from a TS200(H). A 10K external

temperature probe can be connected to the TA1 sensor up to 100' away.

We always recommend using a Pelian certified external temperature probe. Contact your

local Pelican Wireless distributor for assistance.

Note:

Wiring Diagram

Thermostat

TA1 Sensor

23-26V

10K Temperature Sensor

*Range -20˚F to 180˚F

(-28˚C to 82˚C)

Terminal Designations

R −

24 VAC Power

C −

Common 24 VAC

D −

Data Line

T −

10K Temperature Sensor

Summary of Contents for TA1

Page 1: ...the bottom of the TA1 sensor Drill 3 16 holes into the wall at the provided mounting locations on the TA1 sensor Insert anchors into the wall andattach the back plate to the wall using the included mo...

Page 2: ...ptions for the TA1 sensor The TA1 sensor can be installed at a maximum distance of 500 from a TS200 H A 10K external temperature probe can be connected to the TA1 sensor up to 100 away We always recom...

Page 3: ...ls of the TS200 H The following wiring options should be used to determin the proper wiring approach for your application This guide shows the most common configurations Contact Pelican Wireless Syste...

Page 4: ...and the thermostat s temperature sensor Alarm to use the TA1 sensor as an interface for a Dry Contact alarm input Select whether a notification should be sent when the contact is opened or closed Temp...