PELLA
®
INSYNCTIVE
™
BRIDGE PRODUCT GUIDE
|
8
To avoid these issues, BRIDGE memory may be cleared to default
the non-functioning sensor.
To clear the memory,
• Press and hold both the Sync and Test button until BRIDGE
beeps three times. This will require the buttons to be held
for about 5 seconds.
• All sensors within memory will then default to locked and
closed state, even if some sensors are in the unlocked or
opened state.
• All functional sensors must then be operated to update the
state within BRIDGE memory or the state will automatically
update in approximately 1 hour when a supervisory signal is
sent from each sensor.
DETAILED INSTRUCTIONS
(continued)
