PELLA
®
DESIGNER SERIES
®
BETWEEN-THE-GLASS BLINDS AND SHADES WITH INSYNCTIVE
®
TECHNOLOGY
|
4
SPECIFICATIONS
Frequency:
433.92 MHz (Insynctive
®
)
Operating Temperature:
32° – 120°F (0° – 49°C)
Operating Humidity:
5% – 95% RH noncondensing
Battery:
Rechargeable Lithium Ion battery pack
Typical Battery Life:
3 years (may vary with use)
DESIGNER SERIES
®
BETWEEN-THE-GLASS BLINDS or SHADES
can be automatically raised and lowered to improve the comfort
and convenience of your home. BLIND or SHADE may be
controlled with SINGLE-CHANNEL REMOTE or a compatible
home automation system. BLIND or SHADE may be programmed
to three custom positions, including an upper position, user position and lower position.
The slats of BLIND may be tilted to control privacy or the amount of light entering a room.
BLIND or SHADE includes a power unit which is located at the bottom of the Hinged Glass
Panel (HGP) and contains rechargeable batteries. The batteries can be charged by: 1) the solar
panel on the exterior side of the unit, requiring approximately 3 hours of direct sunlight a day,
or 2) a Pella Insynctive WALL CHARGER that magnetically couples to a port clipped to the HGP.
A wire tucks into a groove by the gasket on the HGP and provides power from the charger to
the motor located in the headrail of the BLIND or SHADE.
PRODUCT OVERVIEW
