PELLA
®
DESIGNER SERIES
®
BETWEEN-THE-GLASS BLINDS AND SHADES WITH INSYNCTIVE
®
TECHNOLOGY
|
8
• Press the Up or Down button on REMOTE to move BLIND
or SHADE bottom rail to the desired position.
• Press and hold the Center button until BLIND or SHADE
makes a quick up/down movement. This should take about
3 seconds. The light on REMOTE will stop blinking.
OPERATING BLIND OR SHADE WITH REMOTE
See
InsynctiveSupport.Pella.com
for how-to videos.
• Press and release Up button: Pressing the Up button
for less than 1 second will cause BLIND or SHADE to
automatically move to the upper position that has been
programmed by the user.
• Press and hold Up button: Pressing the Up button for
longer than 1 second will cause BLIND or SHADE to move
up until the button is released or until the shade reaches
the fully opened position.
• Press and release Center button: Pressing the Center
button for less than 1 second will cause BLIND or SHADE to
automatically move to the user position.
• Press and release Down button: Pressing the Down
button for less than 1 second will cause BLIND or SHADE
to automatically move to the lower position that has been
programmed by the user.
• Press and hold Down button: Pressing the Down button for
longer than 1 second will cause BLIND or SHADE to move
down until the button is released or until the shade reaches
the fully closed position.
• While BLIND or SHADE is moving to a position, it may
be stopped by pressing either of the other two buttons.
For example, if the Center button is pressed to move the
shade to the user position, the shade will stop moving if
the Up or Down button is pressed.
DETAILED INSTRUCTIONS
(continued)
UP
BUTTON
DOWN
BUTTON
LED
LIGHT
CENTER
BUTTON
