BRUSH CUTTER EXCELION 2 LH
53_154421-A
4. COMMISSIONING
4.1. PACKAGE CONTENTS
Check that the Brush cutter Excelion 2 LH is delivered with:
• 1 carrying strap to be fitted on the harness
• 1 safety guard
• 1 Excelion 2 LH special key
• 1 TORX 25 wrench
• 1 kit for blades
• 1 Operating instructions manual
4.2. FITTING/DISMOUNTING THE ROUND HANDLE ON THE BRUSH CUTTER
4.2.1. FITTING THE ROUND HANDLE AND THE DISTANCING BAR ON THE TOOL
1. Carefully remove the tool from its packing box.
Lay the tool on a flat, stable and clean surface.
2. Fit the round handle (3) on the transmission tube
(14) at a comfortable distance for the user's arm. The
user's arm should be semi-flexed.
Ensure the correct orientation of the round handle.
The arrow on the sticker on the round handle should
point to the arrow on the sticker on the transmission
shaft.
3. Lock the position of the round handle (3) by screwing
the adjustment knob supplied with your tool (2).
Warning
To guarantee the safety of the user,
it is necessary to respect a dis-
tance (A) between the top of the
HMI screen and the top of the dis-
tancing bar, varies depending on
the cutting tool.
Cutting tool
Maximum distance
(A) to be respected
Position of the
round handle
Tap Cut / Cutting
Blades / Mulching Blade
290 mm
Between the distancing
bar and the control handle
Chisel-tooth saw
300 mm
Between the angle gear
and the distancing bar
17
Summary of Contents for EXCELION 2 LH
Page 2: ......
Page 82: ......
Page 83: ......
Page 84: ...PELLENC Quartier Notre Dame 84120 Pertuis France...
