BRUSH CUTTER EXCELION 2 LH
53_154421-A
Mowing along walls, fences, around trees
and flower beds
• Use the TAP CUT 3 and its strimmer wire as this facil-
itates the removal of grass and avoids the phenome-
non of kickbacks when in contact with a fixed obstacle.
• Protect bark and the edge of flower beds by using the
safety guard as a shield between the surface area to
be cleared and the vegetation to be protected.
Working with the clearing saw
Important
Avoid all contact of the blade with the soil or stones.
• The brush cutter saw can be used for all types of work:
clearing, cutting regrowth, shrubs, woody vegetation,
etc.
• Working with the clearing saw is carried out parallel
to the ground observing the direction of rotation of the
blade to avoid kickback.
• High risk of kickback zone (mark 1)
• Increased risk zone (mark 2)
• Working zone (mark 3)
Work without projections in an urban
environment
• The CITY CUT cutting head is specially designed for
weed control urban environments, in gravel, stabilized
gravel or asphalt.
• Its counter-rotating technology avoids projections, the
upper and lower blades rotating in the opposite direc-
tion to each other.
• According to the user's needs and to optimize his work-
ing comfort, the CITY CUT cutting head is oriented at
28° or 51° depending on the working direction.
• The quick fit assembly of the CITY CUT cutting head
on the Brush cutter Excelion 2 LH takes 20 seconds.
5.7. EMERGENCY RELEASE
The Brush cutter Excelion 2 LH has a quick release system for the tool, making it possible to move away from it
quickly in an emergency.
58
Summary of Contents for EXCELION 2 LH
Page 2: ......
Page 82: ......
Page 83: ......
Page 84: ...PELLENC Quartier Notre Dame 84120 Pertuis France...
