paragraph below) the LED will light up briefly, go off and then
light up again for 3 seconds.
Logic inVeRSion
The battery module incorporates a digital accelerometer which
automatically detects the position of the module on the frame
and adapts the functions of the touch-sensitive area.
The normal operating mode requires the battery module to be
mounted on the frame / glass on the same side as the motor,
with the rounded parte toward the outside of the frame.
If the battery module is installed horizontally, it is assumed that
the motor is positioned on top right.
N.B. (1) For blinds with internal motors there may be some
circumstances where it necessary to invert the ope-
rating logic.
(2) When used with the external motor SL2190 no
adjustments are necessary.
Those cases where the logic must be inverted are:
• module installed in a horizontal position and blind equip-
ped with internal motor positioned top left.
• module installed on left side of frame and blind equipped
with internal motor positioned on the right
• module installed on right side of frame and blind equip-
ped with internal motor positioned on the left
• module installed on same side as internal motor but in a
reversed position (rounded part toward the inside of the frame)
To invert the operating logic, carry out the following procedure:
1. Detach the battery module from
the support
2. Plug the power adapter into a
power socket
3. Connect the power adapter to
the micro-USB port on the bat-
tery module
4. Press the button on the modu-
le with a paper clip and keep it
pressed
5. Disconnect the power adapter
9
Micro
USB
Button
