23
MAINTENANCE
The product requires no maintenance. Any repairs must be
made by a technician authorized by Pellini SpA.
N.B.: any failure to follow the instructions or tampering
with the battery module will invalidate the warranty.
CLEANING
Clean the product using a clean, dry, soft cloth that does
not leave any residues. To remove stubborn dirt, you can
slightly moisten the cloth with warm water. Do not use
solvent-containing detergents. Do not clean the gold-
plated contacts with alcohol or other substances.
REPLACING THE BATTERY
The battery can only be replaced by a technician authorized
by Pellini SpA.
DISPOSOSAL OF THE DEVICE
According to the provisions of Directive 2012/19/EU,
the battery module is to be considered as belonging to
the category of WEEE (Waste Electrical and Electronic
Equipment), thus it cannot be disposed of as unsorted
municipal waste. At the end of its lifetime, the device must
be taken to one of the separate waste collection centres
for waste electrical and electronic equipment from
households. Make reference to the collection centres in
your town or city, which assures that suitable, accessible,
functional separate collection systems are set up to enable
end users and retailers to dispose of the waste produced
within the municipal territory free of charge.
Unplug the device before removing the battery.
The battery must be removed from the device before being
disposed of.
To remove the battery, unscrew the two screws located on
both sides of the connector using a screwdriver Torx T6,
pull the back lid away, remove the battery and disconnect
the connector.
The battery must be disposed of safely.
Summary of Contents for ScreenLine SL2776
