“+”key
On-off key
“-”key
Timing key
Mode key
Sway key
In the power-on mode, press this key to select the timed shutdown setting. The timing indicator lights
up, the temperature display icon lights off, and display screen blinks and shows the rest time of last
setting. Press “+” or “-” keys to set shutdown time, the setting range is 0~24 hours. The machine
confirms the time and quits the timing setting state if without pressing within 5 seconds. If the set time
is 0, it means cancelling the timing setting; if the set time is not 0, the machine shuts down
automatically, enter the idle mode and turns off the timing icon when reaching the set time. Set again
the time after time setting, and the machine is retimed.
In the idle mode, press this key to set timing power-on, of the same operation as timing shutdown.
The time unit of the timer is hour.
On the idle mode, press on-off key to enter the power-on mode, the warmer starts working and the whole machine
runs under the previous remembered mode and temperature. On the power-on mode, press on-off key to enter the
idle mode, the warmer stops working. (Note: On the heating mode, draught fan will operate for 15 seconds at low
wind speed after power off.)
After power repeatedly press the “mode key”, the warmer shifts in circular order among
“energy saving mod, breeze, low warm wind,and high warm wind”.
Key
Function Description
In the power-on mode, press this key to start swaying, and press again to stop swaying.
On-off key
Mode key
On the working state, press “+” or “-” keys to set the working temperature. The temperature
setting range is 40℃~95℃ and every temperature value is of 1℃ difference. The machine confirms and
displays the set temperature value if without operation within 3 seconds after the setting. After room
temperature reaches the set temperature, display screen blinks for 10 seconds and heating unit stops
working; when temperature is below the set temperature, machine restarts to heat.
+ and - key
Timing key
Sway key
F
F
F
Display screen
