3
on anything so that noise leakage can occur.
Note:
The shells can be set in three positions:
(C:2)
working position,
(C:3)
ventilation
position and
(C:4)
parking position.
(D) Adjusting the neckband
(D:1)
Adjust the shells so the ears are completely surrounded by the ear cushions.
(D:2)
Adjust the height using the headband until you have a snug, comfortable fit.
(D:3)
The headband should lie across the top of the head.
IMPORTANT!
For the best protection, brush aside hair around the ears so the ear cushions
fit snugly against the head.
Spectacle frames should be as thin as possible and fit close
to the head.
(E) Adjusting the collapsible headband
(E:1)
Open the headband.
(E:2)
Tilt the top of the shell out, as the wire must be placed on the outside of the headband.
Slide out the shells and place the hearing protectors over your ears so the ear cushions
enclose the ears completely and fit snugly against the head.
(E:3)
Adjust the height of the shells for a comfortable fit while holding the headband flat
against your head.
(E:4)
The headband should lie across the top of the head.
IMPORTANT!
For the best protection, brush aside hair around the ears so the ear cushions
fit snugly against the head.
Spectacle frames should be as thin as possible and fit close
to the head.
(F) Collapsing the collapsible headband
(F:1)
Press the shells in all the way.
(F:2)
Collapse the headband. Check that the ear cushions are not creased and that they
lie flat against one another.
(G) Storing when damp
During long hours of use, the attenuating foam in the shells can become damp, which may
cause damage to the circuits.
For the helmet attachment:
(G:1)
Remove the hygiene kit and let the foam dry by placing the headset in a position that
allows ventilation.
(G:2)
Do not store the hearing protectors pressed against the helmet.
For the collapsible headband:
(G:2)
Tilt the shells outwards to allow the attenuation cushions and electronics to dry.
IMPORTANT USER INFORMATION
The product must be put on, adjusted, cleaned and maintained in accordance with these
instructions.
• Wear the hearing protector 00% of the time you spend in noisy environments for full
protection.
00% use of a working hearing protector is the only sure protection from hearing loss.
If you spend time in environments with more than 85 dB A-weighted noise, you need to
protect your hearing, or the hearing receptors deep in your ears may be irreparably dam-
aged. If you remove the protectors for even a tiny portion of the time you spend in noisy
situations, you are in the danger zone. A comfortable hearing protector designed for the
specific noise level in which it is used is the best guarantee that you will wear the hearing
protector 00% of the time, thereby ensuring protection from permanent hearing loss.
• Clean the outside of the product regularly with soap and warm water.
Note:
Do not immerse in fluids.
• Do not store the product in temperatures exc55 °C, for example on a dashboard
or windowsill.
• The hearing protector, particularly the ear cushions, can degenerate over time and should
be inspected regularly to ensure that there are no cracks and sound leakage.
• Certain chemical substances may be harmful to this product. Contact Peltor for more
information.
Note:
If these instructions are not followed, attenuation and other functions can be im-
paired.
