3
Attention:
Ø
The
PELVI.LOC
®
is not part of the restraint system for the wheelchair and/or user during
transport in a vehicle for the transport of disabled persons.
Ø
Neither the manufacturer nor the distributor will be liable, in the sense of product liability, for
damages or risks caused by unattended children with regard to the product!
Handling
1. To use the
PELVI.LOC
®
place the paddings (a) on the antecubital fold of the hip.
Caution:
Make sure that there are no items under the padding! This will prevent painful bruises.
2. After that, guide the ratchet (b) through the corresponding catch of the buckle. For that, operate
the corresponding pressure buckle (e).
3. Then, tighten the ratchet (b) to a degree that still allows enough space for a flat hand between
the thigh and the padding.
4. Make sure that the the buckles engage with the teeth of the ratchet!
Ø
Check the tension!
In case of an accidental loosening the
PELVI.LOC
®
positioning system can be tightened again.
To open the
PELVI.LOC
®
operate the catch of the buckle (e) and pull out the ratchet (b).
Ø
Make sure that the paddings do not get caught between the stokes of the driving wheel!
Cleaning and Disinfection
Ø
Machine washable up to 40 degrees.
Ø
Thermochemical disinfection possible by adding ELTRA 40 when washing
Ø
No spinning
Ø
Not dryer-proof
Maintenance
Inspect the
PELVI.LOC
®
for damages and check the functioning on a regular basis.
Repair
Immediately replace defective
PELVI.LOC
®
systems.
Disposal
•
The packaging is recyclable.
•
The metal parts can be disposed of through scrap metal recycling.
•
Plastic parts are suitable for plastic recycling.
•
The disposal must be made according to national statutory provisions.
•
Please inquire with your city or municipal administration about local disposal services.
