background image

A ‘Quick Start’ Guide to using the Pelviva

®

 30 Minute Treatment Programme

PEL/00023a/UK (2) January 2020

Before you start using Pelviva we recommend you read the Instructions for Use leaflet and watch the 
‘How to Use’ video on the Pelviva website. Please also check the conditions and warnings 
(contraindications) and when not to use Pelviva guidance to make sure Pelviva is suitable for you to use.

10 second 

delay to allow 

placement of 

Pelviva in your 

vagina

Pelviva 

mimics the 

way your body 

works naturally 

& stimulates your 

Pelvic Floor 

muscles for 

you

Pelviva automatically starts

Pulses

 are automatically generated by the Pelviva stimulator 

contained within the foam. These travel from the pulse pads 
to your Pelvic Floor muscles and return back to the pulse 
pads.

The 

Pelviva foam

 holds the pulse p ads in close contact with 

your vaginal tissue allowing the pulse to be conducted into 
your Pelvic Floor muscle.

Pelviva continuously transmits pulses until the 
microprocessor detects that your 

target treatment intensity

 

has been reached. The feedback mechanism monitors the 
level of stimulation to ensure your target treatment intensity 
is maintained.

Target treatment level reached. Your treatment programme begins

End of 30 

minute treatment

At the 

end of the treatment 

programme Pelviva 

stops automatically. To remove Pelviva, pull gently on 
the removal cord, wrap and dispose of in the normal 
household waste.

Get comfortable.

Apply the OptiLube™ jelly to Pelviva. 

When you are ready to position Pelviva, 

pull the tab

Do not delay. Once you have pulled the tab, the Pelviva 
starts within 10 seconds, it will automatically ‘switch off’ 
if not positioned in the vagina within 1 minute.

Gently squeeze the 

pulse pads

 together. (This makes it 

easy to insert Pelviva inside the vagina. Pelviva should 
sit slightly below where a tampon fits). 

 

1

2

3

4

5

6

7

Are you ready to use Pelviva?

Series of 

10 x 1 second 

pulse trains 

Followed by 

rest phases of  

10 seconds

Once the target intensity is reached the microprocessor 
starts the 

treatment programme

 consisting of a phase 

of 

10x 1 second pulse trains

.

Each phase is followed by a 

rest phase of 10 seconds

 

which protects against over exercising your muscles.

The 

stimulation

 and rest phases

 are repeated

 for the 

remainder of the 30 minute programme.

The 

stimulation pulses

 simultaneously target both your 

power and endurance muscles in the Pelvic Floor to 
help you regain control if you leak when you exercise, 
cough or laugh, or to hold on when you urgently need 
to go to the toilet.

8

9

10

Pelviva Welcome Treatment Pack PEL/00023a/UK (2).indd   2

Pelviva Welcome Treatment Pack PEL/00023a/UK (2).indd   2

28/01/2020   07:59

28/01/2020   07:59

Reviews: