Cascade Comfort System
4
Manufacturer: Penner Manufacturing Inc
101 Grant St
/ PO Box 503
Aurora, NE
68818
(402) 694-5003
Models: Cascade – Comfort
560010-X
Cascade Comfort bathing system Right hand entry
560010-XL
Cascade Comfort bathing system Left hand entry
560010-XSB
Cascade Comfort bathing system Right hand entry Still Bath
560010-XLSB Cascade Comfort bathing system Left hand entry Still Bath
(X in the model number represents a number which denotes a Color of the Spa)
Spa Electrical Ratings:
120 Volts AC
60 Hz
1 Phase
Aqua-Aire:
9.25 amp
60 Hz
1 Phase
UL Classification:
Class I; Type B; Ordinary EQUIPMENT
Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with
oxygen or nitrous oxide.
MEDICAL EQUIPMENT
WITH RESPECT TO ELECTRIC SHOCK
FIRE AND MECHANICAL HAZARDS ONLY
IN ACCORDANCE WITH UL2601-1, AND
CAN/CSA C22.2 NO. 601.1 IEC 60601
Patient weight rating: 400 lbs Maximum
Upright position to reclined position angle: approximately 30°
Reclining actuator rating: 1 minute ON - 9 minutes OFF
All temperature read-out values are accurate to +/- 2ºF (per NSF C-2). The read-out range is
-40/199ºF. The resolution is 1º.
An electrical circuit diagram can be found on the inside of the lid of the electrical box located inside the service
access door on the right side of the spa cabinet.
Service parts and technical information are available by contacting your distributor or by calling one of the
telephone numbers located on the front or back cover of this manual.
Environmental conditions for transport and storage for up to 15 weeks (as packaged from the manufacturer) are
as follows:
Temperature range
-40º F (-40º C) to 120º F (49º C)
Relative Humidity
10% to 90%
Atmospheric Pressure
7.5 PSI to 15.5 PSI
Basic Components
The Cascade Comfort System is composed of the following components:
Cascade Spa with Cascade Door and Control Panel Cabinet.
The remainder of this section describes the components and their relationship to each other.
61LN