600/900 series
PROBLEM
Low flow from pump
1.
Follow routine cleaning procedure if no improvement.
2.
Follow monthly cleaning procedure.
3.
Ensure pipe work is not blocked, leaking or is laid so that it gets crushed
or kinked.
4.
Keep the height that water is to be pumped from the water surface (called
Head) to a minimum. The higher the head the lower the flow rate and the
more wear on the pump.
5.
Use the largest diameter, smoothest bore pond hose over the shortest
distance and keep hose fittings to a minimum. This removes frictional loss
of flow and so increases pump flow rates.
Poor Fountain performance
•
Reduced height.
•
Jets blocked.
Clean flow adjuster and fountain
head. Wash under a tap or hose.
Use foam insert with Daisy Jets
for lower maintenance.
No flow from pump
1.
Check power supply is on.
2.
Check fuse and wiring
(SEE ELECTRICAL INSTALLATION).
3.
Follow low flow procedure as above.
If none of the above works, see ‘Faults - Problem Procedure’ on page 13
or visit
www.penningtonaquagarden.com
for helpful videos.
TROUBLESHOOTING
DAISY
To clean, remove
head and rinse.
Use optional
foam pre-filter with
Daisy Jet heads.
12
