3-3
Chapter 3 Scanning and Settings
3.2 Scan Mode
3.2.1 Sentence Scan
1. Select the
[Sentence Scan]
mode from the
[Scan Mode]
.
2. Select the language of the text that you desire to scan from
[Language Recognition]
.
3. Open any word processor, for example Microsoft Word or WordPad, and then click the
location where you want to input.
4. Place a document on a flat surface and place the scan tip at the front of your desired
scan area. Aim the scan tip arrow at the center of the desired scan area, and then press
and drag the
WorldPenScan
pen in a straight line across the area like a highlighter.
During the scanning, please make sure the white auxiliary light is on.
5. Stop applying pressure to the pen to stop scanning. The scanned text is displayed in
your word processor immediately.
Note: Penpower
WorldPenScan
is able to scan and recognize one row of characters at
a time. Please place the scan tip arrow at the center of the line.
3.2.2 Word Scan
1. Click the
[Scan Mode]
button to select the
[Word Scan]
mode, an extension
window will appear under the toolbar.
Tip: When first time switching to the
Word Scan mode, the Word Scan
Guide window will appear to guide
you how to use the Word Scan mode.
You can check [Do not display this
word scan guide next time] to do not
display it again.
2. Select the language of the text that you desire to scan from the
[Language Recogni-
tion]
.
