2-4
WorldCard
2.2.4 Connecting Hardware
After installing the software, connect the USB connection of your WorldCard scanner or
business card camera to the USB port of your computer.
Note: Some computers may shut down accidentally after connection. This is due to lack of
power to support several USB devices. To avoid this problem, connect your World-
Card scanner/business card camera and other USB devices to an extra-powered
USB hub.
2.3 Preparation for Card Scan
2.3.1 Calibration
After installing the software and drivers,
your WorldCard scanner must be calibrated
in order to ensure perfect results.
Place the calibration card into the
scanner. Make sure the calibration card is
flushed with the mark to the side.
Note: To calibrate the WorldCard Color and Office scanner, insert the blank side of the
card face down. To calibrate the WorldCard Ultra color scanner, insert the blank
side of the card face up. In case the calibration card is lost, you can use any same
size white card for calibration.
Tip: If there is any color indifference after scanning a card, you can calibrate the scanner
by clicking Calibration on the Tool menu.
Summary of Contents for WorldCard Color
Page 2: ...PENPOWER WorldCard User Manual Version 6 3 Edition 3 Release March 2010...
Page 36: ...4 10 WorldCard...
Page 74: ...WorldCard...