Address: Penske Racing Shocks-The Mill House, Packington Hayes, Litchfield,
Staffordshire.
WS14 9PN
Page
7
of
11
E-mail: sales@penskeshocks.co.uk
Tel: 01543 434 580
Sweep Style Eyelet Adjuster
1.)
Turn knob or screw clockwise to full stiff.
2.)
Turn adjuster back “counter clockwise” to
desired settings. Typically this is shown as a
negative (-) settings. Example: Compression -5
clicks, Rebound -10 clicks/sweeps.
3.)
During discussions on handling, if you were to
be instructed to “soften rebound by 5 clicks” it
would mean to adjust your rebound
counterclockwise by 5 clicks or sweeps,
depending on your adjuster.
Knob Style Eyelet Adjuster
This knob adjuster is hand operated, tuning it to (+)
making will increase damping making it stiffer. Twisting
it to (-) will reduce damping making it softer. 2 options
Compression Adjuster
Compression Adjuster uses the 4mm or 5/32 Alan-key this is located in the body cap. It
allows for
40
different positions of compression adjustment. The range of the adjustment is
dependent on what compression stack is used. A typical “B” compressions stack will have
about 150 lbs of adjustment range.
Clockwise = Stiffer
