PENTAGRAM PathFinder (P 3105)
EN - 5
Getting Started
1.
Install the battery
2.
Turn on the GPS Bluetooth receiver.
Switch the power switch (the GPS status LED turns green and
Bluetooth status LED turns Blue.)
3.
Activate Bluetooth function of your PDA/PC
Prior to activating the Bluetooth function of your PDA/PC,
please make sure the device is equipped with Bluetooth
function, and the driver software has been installed.
4. Activate Bluetooth Manager & Established New
Connections. Illustrations using PocketPC:
a) First, find the device with which you wish to establish
connection.
b) Open „Bluetooth Manager” on your PocketPC
c)
Follow the steps below
Tap
New
and then
Connect!
Select above option and tap
Next