WHOLE HOUSE CARBON FILTRATION SYSTEM • 11
HOW TO PROGRAM THE INSTALLER’S LEVEL
To begin, verify that the control is in the Service Mode.
• Press the DOWN ARROW and hold it for 5 seconds; the control will display:
• Within 10 seconds, enter the following key sequence:
DOWN ARROW
DOWN ARROW
SCROLL BUTTON
DOWN ARROW
The control is now in the Installer’s Level. Use the SCROLL BUTTON to advance through the
different settings.
The following settings are available in the Installer’s Level:
1. CAPACITY
The control will display:
• Press the UP or DOWN ARROW to change the volume of treated water between regenerations.
The gallons are in increments of 100. The setting range is 100 to 999,999 gallons (maximum limit).
Press the SCROLL BUTTON to advance to the next setting.
2. SERVICE PHONE NUMBER
The control will display:
Time of Day GL Remaining
System Check
POWER
POWER
KEY BUTTONS:
SCROLL BUTTON
UP ARROW
DOWN ARROW
Capacity: 1200 GL
Change Phone? No
000-000-0000