AMERBRITE™ Color LED Pool Lamp Installation and User’s Guide
Be sure to use the special pilot screw provided with the Amerlite
®
Light. This
screw mounts and electrically grounds the housing securely to the mounting ring
and wet niche. Failure to use the screw provided could create an electrical hazard
which could result in death or serious injury to pool users, installers or others due
to electrical shock.
Always install a new lens gasket (part number 79101601) whenever
disassembling the Amerlite incandescent light fixture assembly. Failure to do so
may permit water to leak into the assembly which could cause; (a) an electrical
hazard resulting in death or serious injury to pool users, installers or others due
to electrical shock; or; (b) breakage of the lamp or lens, which could result in
serious injury to pool users, installers, bystanders, or property damage.
AMERBRITE™ COLOR LAMP INSTALLATION INSTRUCTIONS
Before working on the AmerBrite color lamp,
always disconnect
power to the pool and/or spa lights at the source circuit breaker
from the light before servicing the light. Failure to do so could
result in death or serious injury to service person, pool users
or others due to electric shock. When installing and using this
electrical equipment, basic safety precautions should always
be followed, include the following:
RISK OF ELECTRICAL SHOCK OR ELECTROCUTION:
THE AMERBRITE COLOR LAMP MAY REQUIRE HIGH VOLTAGE
WHICH CAN SHOCK, BURN, OR CAUSE DEATH.
PILOT SCREW
(12 O’clock)
5
