Installer Manual Performa 263-268 / LOGIX 740-760 - Programming
34 / 64
Ref. MKT-IM-011 / A - 15.06.2017
6.3.4. Regeneration time
Set the time when regeneration will take place.
6.3.5. Days to regenerate (740 time-clock controller only)
Set number of days between time-clock regeneration (regen frequency).
6.3.6. Calendar override (760 on-demand controller only)
Set number of days for calendar override on-demand controller.
6.3.7. Amount of brine used per regeneration
Set desired brine amount. 3 salt settings are available on 740 and 760 controllers:
•
S – Standard Salt – 120 grams/liter of resin.
•
H – High Salt – 200 grams/liter of resin.
•
L – Low Salt – 40 grams/liter of resin.
A
Press .
→ Regeneration time flashes.
B
Adjust displayed time with
and
.
C
Default setting: 2:00am.
D
Press
to validate the selection and advance to the next
parameter using
or
.
A
Press .
→ Number of days flashes.
B
Adjust displayed number with
and
.
→ Default number: 3 days.
→ Days can be adjusted from ½ (.5) to 99 days.
C
Press
to validate the selection and advance to the next
parameter using
or
.
A
Press .
→ Number of days flashes.
B
Adjust displayed number with
and
.
→ Default time for calendar override: 0 day.
→ Days can be adjusted from ½ (.5) to 99 days.
C
Press
to validate the selection and advance to the next
parameter using
or
.
A
Press .
→ Setting flashes.
B
Adjust displayed settings with
and
.
→ Default setting is "S" standard salting.
C
Press
to validate the selection and advance to the next
parameter using
or
.
