COLORCASCADE
®
Color Pool and Spa Light Installation and User’s Guide
COLORCASCADE
®
Color Pool and Spa Light Installation and User’s Guide
To access the Standard Mode setting, you must cycle the power to the ColorCascade
Light with 16 Off/On sequences. To return to the IntelliBrite
Mode, cycle the power Off/On
with 17 sequences By turning the switch Off and On a specific number of times, the light
activates one of the three light show modes or locks a chosen color.
Selecting a color light show mode or fixed color
Switch power on to the ColorCascade light. A random color will flash indicating the
program you are in, followed by the previously selected program mode. To select a color
show mode or fixed color, turn the wall switch off/on a specific number of times. Please
review the chart below and follow the power cycle sequence to activate the various show
feature effects while in “show” modes.
1.
Fixed Color:
Turn power off and then on to “Hold” the Light on that specific color (no
matter what color show you are in). If you keep the unit on that color for at least five (5)
seconds, the ColorCascade light will “save” this color and keep it in that mode until you
release it with an additional power off/on sequence. In “Fixed Color” mode the light when
powered on, will not flash its program, but immediately go to the “Fixed Color” chosen.
2.
Color Show Mode:
Turn power off and then on twice (Off/On, Off/On) to cycle through
the following three color modes. Turning the power on and off twice (Off/On, Off/On) will
continue to cycle through the programs.
Operating ColorCascade
®
Lights in Standard Mode
5
Synchronized Mode:
All ColorCascade lights on the same circuit will synchronize and
cycle on the same colors. When the units are in this mode, when powered up, the light
will flash a random color one time and then turn all units on white and then start cycling
through the eight colors. The single flash of a random color is the visual confirmation
what color show you have activated. The light will stay in this mode each time the
system is powered on until a program change is made.
Random Mode:
Turn the power on and then off twice (Off/On, Off/On) and the light will
cycle to the next program, Random Mode. In this mode each of the ColorCascade lights
will cycle together, but in random colors. When this mode is selected, the light will flash
twice to indicate it is in random mode and then start up in a random color sequence. If
multiple lights are on the same circuit, each light will display different random colors.
Party Mode:
Turn the power on and then off twice (Off/On, Off/On) and the light will
cycle to the next program, Party Mode. In this mode each of the ColorCascade lights will
cycle together, but in random colors and in ever increasing cycle speeds until the last
ten seconds at which time the ColorCascade lights will randomly flash different colors at
different times. When this mode is selected, the light will flash three times to indicate it is
in Party Mode and then start up in a random color sequence. If multiple lights are on the
same circuit, each light will display different colors. In the event of a power interruption
or power loss and the units become out of sequence, turn the light switch on and then
off four times (Off/On, Off/On, Off/On, Off/On). The unit will flash five (5) times then
reset all of the lights and start them in Random Mode.
