English
X
0
18
36
54
72
90
108
0
2
4
6
8
10
12
0
10
20
30
40
50
60
0
51
102
152
203
254
305
100W
200W
400W
800W
1300W
WIRING
Reference Wiring Illustration on page 6
1. All wiring must comply with applicable local codes and ordinances.
2. Connect the heater lead wires to the proper A.C. power source. Power source for 800
and 1300 watt heaters should be continuous.
3. The heater must be properly grounded.
NOTE: Exposed wires should not come in contact with the heater housing.
SETTING THE THERMOSTAT
1. The heater is controlled by an adjustable thermostat. Set the thermostat to the desired
temperature. It is recommended not to exceed 75 F for most applications.
MAINTENANCE
1. Always disconnect power supply before inspecting or working on the heater.
2. Generally the unit requires no maintenance since the fan bearings are permanently
lubricated and sealed.
Temperature Rise vs. Distance Above Heater
Distance Above Heater (mm)
(Minimum
recommended distance
above heater)
Distance Above Heater (in.)
Temper
atur
e R
ise A
bo
ve Hea
ter (°F)
Temper
atur
e R
ise A
bo
ve Hea
ter (°C
)
© 2012 Pentair Technical Products
- 4 -
PH 763 422 2211 • hoffmanonline.com
87565511
