Installer manual Fleck 5600 SXT - Safety
14 / 104
Ref. MKT-IM-013 / E - 23.09.2020
2.3.2
Material
The following points must be observed to ensure proper operation of the system and the safety of
user:
• be careful of high voltages present on the transformer (100 – 240 V);
• do not put your fingers in the system (risk of injuries with moving parts and shock due to
electric voltage).
2.4
Hygiene and sanitization
2.4.1
Sanitary issues
Preliminary checks and storage
• Check the integrity of the packaging. Check that there is no damage and no signs of contact
with liquid to make sure that no external contamination occurred;
• the packaging has a protective function and must be removed just before installation. For
transportation and storage, appropriate measures should be adopted to prevent the
contamination of materials or the objects themselves.
Assembly
• Assemble only with components which are in accordance with drinking water standards;
• after installation and before use, perform one or more manual regenerations in order to
clean the media bed. During such operations, do not use the water for human consumption.
Perform a disinfection of the system in the case of installations for treatment of drinking
water for human use.
Info
This operation must be repeated in the case of ordinary and extraordinary
maintenance. It should also be repeated whenever the system remains idle for a
significant time.
Valid only for Italy
In case of equipment used in accordance with the DM25, apply all the signs and
obligations arising from the DM25.
2.4.2
Hygiene measures
Disinfection
• The materials used for the construction of our products meet the standards for use with
potable water; the manufacturing processes are also geared to preserving these criteria.
However, the process of production, distribution, assembly and installation, may create
conditions of bacterial proliferation, which may lead to odor problems and water
contamination;
• it is therefore strongly recommended to sanitize the products. See Sanitization [
Page 67] ;
• maximum cleanliness is recommended during the assembly and installation;
• for disinfection, use Sodium or Calcium Hypochlorite and perform a manual regeneration.
