Installer manual Fleck 5600 SXT - Maintenance
84 / 104
Ref. MKT-IM-013 / E - 23.09.2020
9.4.7
Injector cleaning
1. Using a flat screwdriver or an 8 mm wrench, remove the screws (
6
).
2. Remove the cap injector (
5
).
3. Remove the seal (
4
).
4. Remove the filter (
2
).
5. Using a flat screwdriver, remove the injector nozzle (
3
).
6. Using a flat screwdriver, remove the injector throat (
1
).
7. Clean or change the injector throat (
1
), the injector nozzle (
3
), the filter (
2
) and the seal (
4
).
8. Lubricate all seals with approved lubricant only.
Caution - material
Risk of damage due to wrong lubricant use !
Do not use petroleum-based lubricants such as vaseline, oils, or hydrocarbon-based
lubricants.
Use only approved silicone grease or soapy water !
9. Reverse above procedure steps to rebuild.
