Installer manual Fleck 5600 SXT - Maintenance
Ref. MKT-IM-013 / E - 23.09.2020
79 / 104
9.4.3
Controller replacement
1. Using a Philips screwdriver, unscrew (
1
) and remove the cover (
2
) paying attention for the
wire.
2. Press the board clips (
3
) and release the controller cover (
6
).
3. Using a flat screwdriver, unscrew (
5
) and remove the controller (
4
).
4. Remove carefully the wire connectors (
7
).
5. Connect the new controller, see Electrical connections [
6. Reverse above procedure steps to rebuild.
