After cleaning the outside of the easyconnect cap and internal
parts of Cleanload Nexus, release the Rinse Water Lever (Ref. 13).
Ensure that the Rinse Water Lever has returned to the horizontal
position shown.
The container can be released by pulling the Lock Release Knob
(Ref. 12) and at the same time moving the Operating Handle (Ref.
11) to the left.
Detach the empty and clean container from the Cleanload Nexus.
Prior to disposal the container can be pushed onto a drip tray spike,
this will push the plug into the container and allow any residual
rinse water to drain out.
If this is the last container, ensure that the Cleanload Nexus
cleaning procedure (in section 7.1) is completed.
Replace the Top Cover (Ref 16) onto the Cleanload Nexus before
beginning spraying operations.
CLEANLOAD NEXUS
PNR-CN100-OIPM (10/12/21) ©2021 Pentair. All Rights.
19
