CLEANLOAD NEXUS
PNR-CN100-OIPM (10/12/21) ©2021 Pentair. All Rights.
11. WARRANTY
Hypro/SHURflo (hereafter, “Hypro”) agricultural products are warranted to be free of defects in material and workmanship under normal
use for the time periods listed below, with proof of purchase.
- Pumps and Closed Transfer Systems: one (1) year from the date of purchase.
- Accessories: ninety (90) days from the date of purchase.
This limited warranty will not apply to products that were improperly installed, misused, misapplied, damaged, altered, or incompatible
with fluids or components not manufactured by Hypro. Buyer must give Hypro notice in writing of any alleged defect that is covered by
the warranty (together with all identifying details, including the serial number, the type of equipment, and the date of purchase) within
thirty (30) days of the discovery of such defect during the warranty period. Hypro assumes no responsibility or liability if alterations, non-
authorized design modifications and/or non-OEM replacement parts are incorporated.
Hypro’s obligation under this limited warranty policy is limited to the replacement of the product. All returns will be tested per Hypro’s
factory criteria. Where products are found not to be defective (under the terms of this limited warranty), then the Buyer must pay return
packing and freight charges. Where products are tested and found to be covered by this limited warranty, then Pentair will pay for return
packing and freight charges. Hypro reserves the right to choose the method of transportation.
This limited warranty is in lieu of all other warranties, expressed or implied, and no other person is authorized to give any other warranty or
assume obligation or liability on Hypro’s behalf. Hypro shall not be liable for any labor, damage or other expense, nor shall Hypro be liable for
any indirect, incidental or consequential damages of any kind incurred by the reason of the use or sale of any defective product.
Return Procedures
All products must be flushed of any chemical (ref. OSHA section 1910.1200 (d) (e) (f) (g) (h)) and hazardous chemicals must be labelled/
tagged before being shipped* to Hypro for service or warranty consideration. Hypro reserves the right to request a Material Safety Data
Sheet from the returnee for any pump/product it deems necessary. Hypro reserves the right to “disposition as scrap” products returned
which contain unknown fluids. Hypro reserves the right to charge the returnee for any and all costs incurred for chemical testing, and pro
-
per disposal of components containing unknown fluids. Hypro requests this in order to protect the environment and personnel from the
hazards of handling unknown fluids. Be prepared to give Hypro full details of the problem, including the model number, date of purchase,
and from whom you purchased your product. Hypro may request additional information, and may require a sketch to illustrate the prob-
lem. Contact the appropriate Hypro Service Department to receive a Return Merchandise Authorization number (RMA#). Returns are to be
shipped with the RMA number clearly marked on the outside of the package. Hypro shall not be liable for freight damage incurred during
shipping. Please package all returns carefully. All products returned for warranty work should be sent shipping charges prepaid.
27
