JET-VAC INSTALLATION MANUAL
7
3. Check the filter screen inside the wall fitting to make sure it is free of debris. (It is important to check and
thoroughly clean the wall fitting filter screen periodically.)
4. Remove the wall adaptor from the wall fitting and screw adaptor by hand into the dedicated line.
Turn until tight.
5. Take the wall fitting and twist lock the wall fitting into the wall adapter 1/4" turn; to a snug fit.
Once the wall adapter is secure you can now twist lock and unlock to remove wall fitting with ease from
the wall adapter. See Figure 1.
The JET-VAC feed lines are formulated with a special material for maximum
performance. These feed lines cannot be kinked at any time, either during operation
or when being removed from the pool. Kinking feed lines will result in bursting and
will not be covered.
FEEDER HOSE ASSEMBLY:
NOTES: Feeder hoses come assembled and must always be in the following order:
First section is white hose with quick disconnect which connects to wall fitting.
Second section is dark blue hose which connects to white swivel connection.
Third section is light blue hose with whip hose attached and connects to cleaner.
Wall Adapter Installed
Quick Disconnect
Quick Lock Peg
O-Ring
Figure 1.
