KREEPY KRAULY
®
PLATINUM
™
INSTALLATION MANUAL
Important Information:
The Kreepy Krauly
®
Platinum
™
automatic pool cleaner comes ready to connect into a female threaded 1-
1/2" line, dedicated to our Universal Booster Pump. Also, if you have a chlorinator, solar system or other
air inducing equipment, contact our Technical Support Department at 1-800-831-7133 before you install
the Kreepy Krauly
®
Platinum
™
cleaner. (
See diagram on page 2
).
The following are important facts to remember before installing and operating the Kreepy Krauly
®
Platinum
™
.
1.
Always disconnect the Kreepy Krauly
®
Platinum
™
from the pool wall when cleaning or back washing the
pool filter.
2.
After cleaning or back washing, let the filtration system run for at least five minutes before reconnecting
the Kreepy Krauly
®
Platinum
™
.
3.
New plumbing lines should be flushed out before installing the Kreepy Krauly
®
Platinum
™
.
4.
The Kreepy Krauly
®
Platinum
™
should not be used to remove plaster dust in new pools.
5.
Always remove the Kreepy Krauly
®
Platinum
™
before swimmers enter the pool.
6.
Always handle the Kreepy Krauly
®
Platinum
™
with care. Do not let children or pets play with the unit: it is
not a toy.
7.
Always pick up the Kreepy Krauly
®
Platinum
™
by the Vacuum Tube especially when lifting the unit out of
the water.
8.
Unless checking the wheel RPM, do not handle the Kreepy Krauly
®
Platinum
™
while it is operating.
9.
Always remove the Kreepy Krauly
®
Platinum
™
from the pool before chemical shock treatments. As a
rule, any pool water that is unsafe for swimming is unsafe for the Kreepy Krauly
®
Platinum
™
.
10. Carefully cut the feed hose following the instructions on
Page 3
.
By following these simple guidelines, you can help protect against injury and prolong the life of
your Kreepy Krauly
®
Platinum
™
.
Before the Kreepy Krauly
®
Platinum
™
is installed, please take a moment to record the serial number. This
number is located on your warranty card and on the back of the Kreepy Krauly
®
Platinum
™
near the rear
jets. You will be asked for this number when you contact our Technical Support Department.
SERIAL #__________________________________
LL105PM / LL105PMG
LL105PMTGG / LL105PMTWW
LL105PMTRW / LL105PMTYW
