KREEPY KRAULY
®
PLATINUM
™
INSTALLATION MANUAL
II. Installation Instructions
A. Kreepy Krauly
®
Platinum
™
Components
The Kreepy Krauly
®
Platinum
™
Box Contains:
1. Cleaner Head
2. Sand & Silt Bag
3. Sweep Hose
4. Complete Feed Hose
a. 1 - 8½ in. hose
b. 2 - 10 ft. long hoses
c. 1 - 30 in. soft hose/1 - 7½ ft. soft hose
d. 10 - Floats
e. 3 - Swivels
f.
1- Back-Up Valve
g. 10 - Mender Nuts
h. 1 - Wall Fitting complete
B. Pool Connections
The Kreepy Krauly
®
Platinum comes equipped to
connect to a female threaded 1-1/2 in. line, dedicated
to our Universal Booster Pump.
Also, if the pool doesn't have a dedicated cleaner
line please contact our Technical Support
Department at 1-800-831-7133.
C. Booster Pump Installation
If you already have a 3/4 horsepower booster pump
installed at your equipment pad and it is operational,
skip this section and proceed to Installing the Twist
Lock Pressure Relief Valve (Wall Fitting).
Detailed booster pump installation instructions are
packaged separately in our booster pump box.
Please follow these instructions carefully.
The booster pump is not self-priming and needs to
be fed with water taken from the pool filter before
any type of in-line chlorinator. See figure below.
2
C
D
G
B
G
C
B
D
E
B
A
E
D
B
H
D
F
1
2
3