background image

iii

WARRANTY INFORMATION  

 

Limited Warranty Terms & Conditions

Before installing your cleaner, review and understand all warnings, safety 
and warranty information in this guide. Failure to follow these instructions 
or improper installation of the cleaner can result in damage to the pool 
finish or the vinyl liner, Pentair Aquatic Systems disclaims any liability for 
repairs or replacement to any of these structures or components of the 
customer’s pool.
The Cleaner manufacturer, Pentair Aquatic Systems (“Manufacturer”), 

hereby provides the following limited warranty to the purchaser 

(“Customer”): WHICH IS SUBJECT ONLY TO THE FOLLOWING 

CONDITIONS AND EXCLUSIONS:
This limited warranty does not include replacement of parts which become 

discolored due to exposure to sunlight or chemicals, or parts which, even 

if worn, do not affect performance of the cleaner. Nicks, scratches, fading, 

discoloration, etc. are cosmetic conditions that do not affect mechanical 

performance.

  Both Manufacturer and dealer of Pentair  Aquatic 

Systems

 

reserve the right to deny any and all warranty claims made 

for worn parts if the wear  does not negatively  affect mechanical 

performance of the cleaner.

The Cleaner is designed to function in a properly designed, constructed 

and maintained pool. This limited warranty does not extend in the 

circumstances where the pool’s design, construction or maintenance 

is defective, substandard or inappropriate for the Cleaner’s operation.
Deterioration, discoloration or brittleness of any pool finish can be caused 

over time separately by, or in combination with, age, an imbalance in 

water chemistry, improper installation, and other factors. Customer hereby 

disclaims any and all claims, and releases Manufacturer from any and all 

claims for damages to any pool plaster or vinyl liner in Customer’s pool 

by reason of the use and/or operation of the Cleaner.
Under no circumstances shall Manufacturer be liable for any loss or 

damage, whether direct, consequential or incidental, arising out of the 

use or inability to use the Cleaner or the Hose in Customer’s pool.
This limited warranty does not apply to any injury, loss, damage, defect, 

or malfunction of the Cleaner or failure to function resulting from any 

failure to operate or maintain the Cleaner in accordance with the 

directions contained in the Installation and Operation Manual or operating 

instructions provided by Pentair Aquatic Systems

 

or any injury, loss, 

damage, defect, or malfunction, or failure to function resulting from any 

accident, acts of God, alterations in the Cleaner by anyone other than 

Manufacturer; or misuse, unreasonable use, tampering, abuse, acts, 

omissions, failure or negligence by anyone other than Manufacturer 

including but not limited to such damages or injuries to parts resulting 

from improper installation, or damage to pump parts resulting from 

running the pump dry (e.g., interruption in or inadequate supply of water 

to internal pump parts due to loss of prime, or obstruction in lines or 

otherwise); or damage, defect or malfunction resulting from defects in, 

failure or malfunction of, or negligence, abuse, or misuse with respect to 

equipment other than the Cleaner; or any damage or loss of any nature 

whatsoever and personal injury caused due to the presence of a foreign 

object in or about the pool.

Disclaimer of Liability 

About your Pool and Prowler

®

  820 and 830

There are a multitude of factors that contribute to the life of your pool. 

The Prowler

 

820 and 830 robotic pool cleaner are very passive products 

that will have no impact on pool life.
Please be aware that over time, deterioration, discoloration and brittleness 

of any pool finish can be caused separately by, or in combination with, 

age, an imbalance in pool water chemistry, improper installation and other 

factors. Robotic pool cleaners, such as the Prowler

 

820 and 830, will not 

remove or cause wear on “good” pool plaster. In fact, the opposite is 

true–pool plaster will eventually cause wear on the cleaner.
The same situation holds true for vinyl-lined in-ground swimming pools, 

because vinyl liners are also affected by the environment and factors such 

as pool water chemistry, sunlight and the pool’s surroundings. Therefore 

over time, vinyl can become brittle and weak. In addition, vinyl-lined pools 

are affected by the workmanship, composition and installation of the liner 

and the workmanship and quality of construction of the supporting walls 

and pool base. These are all factors which can contribute to liner failure. 

The existence of any of these type of conditions in your pool is not caused 

by the use or operation of the Prowler

 

820 and 830. The manufacturer 

disclaims any liability for repairs or replacement to any of these structures 

or components of the customer’s pool.
The pool owner must assume all responsibility for the condition and 

maintenance of the pool’s surface, water and deck.

SAVE THESE INSTRUCTIONS

PROWLER

® 

820 and 830 Installation and User’s Guide 

Summary of Contents for KREEPY KRAULY PROWLER 820




















Reviews: