background image

© 2008 Pentair Water Pool and Spa, Inc. 

All rights reserved.

This document is subject to change without notice.

1620 Hawkins Ave., Sanford, NC 27330 • (800) 831-7133 • (919) 566-8000

10951 West Los Angeles Ave., Moorpark, CA 93021 • (800) 831-7133 • (805) 553-5000

293 Wright St., Delavan, WI 53115 • (262) 728-5551

Trademarks and Disclaimers:

 SandShark

, Kreepy Krauly

®

 and Pentair Water Pool and Spa

®

 are trademarks and/or registered trademarks of

Pentair Water Pool and Spa, Inc. and/or its affiliated companies in the United States and/or other counties. Unless noted, names and brands of others
that may be used in this document are not used to indicate an affiliation or endorsement between the proprietors of these names and brands and
Pentair Water Pool and Spa, Inc. Those names and brands may be the trademarks or registered trademarks of those parties or others.

P/N   39503-6300      Rev. A    10/27/08

Customer Service

If you have questions about ordering Pentair replacement parts, and pool products,
please use the following contact information:

Customer Service 

(8 A.M. to 5 P.M. — Eastern and Pacific Times)

Phone: (800) 831-7133

Fax: (800) 284-4151

Technical Support

Sanford, North Carolina 

(8 A.M. to 5 P.M. — Eastern Time)

Phone: (919) 566-8000

Fax: (919) 566-8920

Moorpark, California 

(8 A.M. to 5 P.M. — Pacific Time)

Phone: (805) 553-5000 (Ext. 5591)

Fax: (805) 553-5515

Web site

visit 

www.pentairpool.com

 or 

www.staritepool.com

 to find information about Pentair products

Protected by one or more of the following U.S. Patents and all
corresponding foreign counterparts: U.S. Pat. No. 5,261,287,
5,274,868, 5,404,607, 5,664,275, 5,787,156, 5,799,351, 5,974,647,
6,237,175, D373,230, D401,023 and Canada Patent Nº. 2,090,195.

Summary of Contents for Kreepy Krauly SandShark 7900

























Reviews: