background image

ii

SandShark

 Installation and User’s Guide

IMPORTANT SAFETY PRECAUTIONS

Important Notice:

Attention Installer: 

This guide contains important information about the installation, operation and safe use of

this product. This information should be given to the owner and/or operator of this equipment after installation of the
pool cleaner.

Attention User: 

This manual contains important information that will help you in operating and maintaining this

pool cleaner. Please retain it for future reference. Consult Pentair Water with any questions regarding this equipment.

 WARNING

  —

Before installing this product, read and follow all warning notices and instructions which are
included. Failure to follow safety warnings and instructions can result in severe injury, death,
or property damage. Call (800) 831-7133 for additional free copies of these instructions.

Consumer Information and Safety

The SandShark

 pool cleaners are designed and manufactured to provide many years of safe and reliable service when

installed, operated and maintained according to the information in this manual. Throughout the manual, safety warnings
and cautions are identified by the “      “ symbol. Be sure to read and comply with all of the warnings and cautions.

 

WARNING

 —

Hazardous suction.

 Do not play with cleaner or hose or apply to body. Can trap and tear hair

or body parts. Hose can trip or entangle swimmers which could result in drowning.

 

WARNING

 —

Suction entrapment, injury, and drowning hazard.

 If your pool has a dedicated suction port

(“vac port”) for vacuuming or for an automatic pool cleaner, it 

must be covered when not in

use. 

A spring loaded safety cover (a “vac port fitting”) is included with your cleaner. Install it on

the suction port to prevent entrapment and injury. If the cover provided does not fit, purchase one
that does from your local pool store and install it instead. The cover should conform to IAPMO
SPS4-99A.

 

WARNING

 —

Stop pump 

before attempting to clean unit. Do not allow swimmers in pool while pool cleaner

is operating.

 WARNING

  —

To reduce the risk of injury, do not let children use or play with pool cleaner.

 

WARNING

 —

Do not allow swimmers in the pool while pool cleaner is operating. Hose can trip or entangle
swimmers which could result in drowning.

 

CAUTION

 —

Oscillator may injure hands or fingers. 

Stop pump 

before attempting to clean out pool cleaner

head.

Summary of Contents for Kreepy Krauly SandShark 7900

























Reviews: