background image

33

GB

3.3 STORAGE

The storage area must have the following physical characteristics:

•  An extent fit for containing the 

machine and the possible packaging 

and allowing the hoisting by means of 

the foreseen hoisting means

•  Even and horizontal resting surface
•  Resting surface having a carrying 

capacity exceeding the weight of the 

number of stored machines

•  Protection form possible accidental 

bumps

3.3.1 CHARACTERISTICS OF THE STORAGE AREA

The storage area must have the following environmental characteristics:

•  Allowed temperature range: 

-15 °C ÷ +50 °C

•  Relative humidity range: 30 ÷ 90%

•  Protection from atmospheric agents

3.3.2 ENVIRONMENTAL CHARACTERISTICS OF THE STORAGE AREA

Possibility of machine fall. Secure the machine or store it in an inaccessible place.

Do not put the machines one on top of the other.

DANGER

Keep the machine in vertical position with the motor in the upper part.

ATTENTION

3.4 PRELIMINARY CHECKS

•  Check the integrity of the packaging 

if present

•  Open the packaging, if present, and 

extract the machine

•  Check that the received machine 

matches the ordered one

3.4.1 CHECK FOR DAMAGES

Keep the original packaging, if present, for a possible future transport of the machine.

ATTENTION

In case of non-compliance or damages, signal to PENTAIR INTERNATIONAL S.a.r.l. or to the seller the problem within 8 (eight)

days from the purchase date.

3.4.2 DAMAGE SIGNALLING

3.5 PREPARATION OF THE INSTALLATION AREA

The machine installation area must have the following characteristics:

•  Facilitate the positioning and access 

to the machine

•  Allow a safe connection to the electric 

system

•  Allow safe connections to piping
•  Presence of a fit natural   

and/or artificial lighting allowing safe 

operation

•  A minimum distance of 150 mm 

between any machine point and any 

obstacle

•  Ensure sufficient ventilation for the 

motor fan

3.5.1 CHARACTERISTICS OF THE INSTALLATION AREA

Check that the machine is not damaged, in particular check the integrity of:

•  Motor fan cover
•  Terminal box cover

•  External lining

•  Cast iron parts

Summary of Contents for Nocchi VLR 16




























Reviews: