6
Prowler
™
720 and 730 Installation and User’s Guide
Setting Up the Standard Power Supply (Transformer)
To plug the cable into the
transformer socket on the power
supply, follow these steps:
1. Prepare the plug with the
key and three outside slots
as shown in Figure 9.
2. Fit the key and the slots
from cable plug exactly
with the corresponding
key and slots from the
transformer socket.
3. Push the plug all the way
into the socket of the
transformer.
4. Once the plug is in, rotate
the plug to the right to
lock it into place as
shown in Figure 9.
5. To remove the plug, first
rotate the plug to the left
to unlock it, then pull it
out.
6. The Power Supply
(Transformer) is now
ready for operation.
Listed below are the
Transformer buttons as
shown in Figure 10:
a.
Green
Button:
push
button turns the
machine ”ON”.
b.
Red Button:
push
button turns the
machine “OFF”.
IMPORTANT–
After every
cycle, the pool cleaner will turn
off automatically. In case you
want to turn the machine off
during the working cycle, push
the
red button
once and the
indicator light
will turn off
signaling that the machine has
stopped running.
Figure 9.
Figure 10.
(Remember to keep the Power Supply at least 10 feet away from the pool.)
Push and rotate right to lock
Transformer
Socket
Transformer
Cable Plug
Transformer
Socket
Cable Plug
Rotate left and pull to unlock
b
a
