14-Slot AdvancedTCA Shelf
Maintenace
11596-100/-101/-102/-103
www.a-tca.com / www.schroff.biz
32
R1.1, July 23, 2008
Figure 21: Chassis Data Modules (CDMs)
1
Remove:
1 Remove the resp. PEM.
Note:
See instructions in
Chapter 4.4, "Power Entry Module (PEM) Replace-
.
2 Remove the fixing screw (4).
Note:
Use a magnetic screwdriver to prevent the fixing screw from falling
into the Shelf!
3 Push the CDM in direction of the arrow to release the locking mechanism in
the CDM slot.
4 Remove the CDM.
Install:
1 Insert the CDM in the CDM slot.
2 Push the CDM in direction of the arrow to lock the locking mechanism in the
CDM slot.
3 Mount the fixing screw (4).
Note:
Use a magnetic screwdriver to prevent the fixing screw from falling
into the Shelf!
4 Install the PEM.
12706915
1
CDM 1
3
Slot
2
CDM 2
4
Fixing Screw
Summary of Contents for Schroff AdvancedTCA 11596-100
Page 41: ......
