background image

© 2013 Pentair Equipment Protection

88047465

- 11 -

MAINTENANCE

COMPRESSOR

The compressor requires no maintenance. It is hermetically sealed, properly lubricated at the factory and 

should provide years of satisfactory operating service.

CONDENSER AND EVAPORATOR BLOWER MOTORS

Blower motors require no maintenance. All bearings, shafts, etc. are lubricated during manufacturing for 

the life of the motor.

Operation of the air conditioner in areas containing airborne 

caustics or chemicals can rapidly deteriorate condenser coils, 

blowers and motors, etc. Contact Pentair Equipment Protection 

for special recommendations.

CAUTION

REFRIGERANT LOSS

Each air conditioner is thoroughly tested prior to leaving the factory to insure against refrigeration leaks. 

Shipping damage or microscopic leaks not found with sensitive electronic refrigerant leak detection 

equipment during manufacture may require repair or recharging of the system. This work should only be 

performed by qualified professionals, generally available through a local, reputable air conditioning repair 

or service company.
Should the refrigerant charge be lost, recharging ports (access fittings) on the suction and discharge sides 

of the compressor are provided for recharging and/or checking suction and discharge pressures. Under 

no circumstances should the access fitting covers be loosened, removed or tampered with. Breaking 

of seals on compressor access fittings during warranty period will void warranty on hermetic system. 

Recharging ports are provided for the ease and convenience of reputable refrigeration repair service 

personnel for recharging the air conditioner.
Refer to the data on the nameplate that specifies the type of refrigerant and the charge size in ounces.

NOTE: Before recharging, make sure there are no leaks and that the system has been 

properly evacuated into a deep vacuum. Technician must weigh in charge according to the 

nameplate specifications.

RSPSupply  -  1-888-532-2706 -  www.RSPSupply.com

http://www.RSPSupply.com/p-19627-Hoffman-T622246G400-T-Series-AC-460V-23500-BTU-Outdoor.aspx

Summary of Contents for T Series

















Reviews: