background image

F

R

A
N

Ç

A

I

S

E
S
P

A
Ñ
O

L

®

Teel Pool Pump with
Integral Trap

Operating Instructions & Parts Manual   

4RJ93, 4RJ94 and 4RJ95

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.

Form 5S4186

®

E

N
G

L

I

S

H

Printed in U.S.A.
09319
1100/379/VCPVP

Unpacking and Inspection

Handle with care. Check items received
against packing list to be sure that all
equipment has been received. Inspect
for shipping damage. If found, file
claim with carrier immediately.

IMPORTANT

SAFETY 

INSTRUCTIONS

Always follow basic safety
precautions with this equipment,
including the following:

To reduce the risk
of injury, do not

permit children to use this product unless
they are closely supervised at all times.

This pump is for
use with

permanently installed pools and may
also be used with hot tubs and spas if so
marked. Do not use with storable pools.
A permanently installed pool is
constructed in or on the ground or in a
building such that it cannot be readily
disassembled for storage. A storable
pool is constructed so that it may be
readily disassembled for storage and
reassembled to its original integrity.

SAVE THESE

INSTRUCTIONS
READ AND

FOLLOW SAFETY

INSTRUCTIONS!

This is the safety alert symbol.

When you see this symbol on your

system or in this manual, look for one of
the following signal words and be alert
to the potential for personal injury.

Warns about

hazards that will

cause death, serious personal injury, or
major property damage if ignored.

Warns about
hazards that can

cause death, serious personal 
injury, or major property damage if
ignored.

Warns about
hazards that will or

can cause minor personal injury or
property damage if ignored.

NOTE:

Indicates special instructions

not related to hazards.

Carefully read and follow all
safety instructions in this manual
and on equipment.

Keep safety

labels in good condition; replace if
missing or damaged.

4RJ93

1

15.3/7.6

115/230

1

60

3450

230V

2”

2”

14

7

16

10

23

32

25

1

2

37 lbs.

4RJ94

1

1

2

19.2/9.6

115/230

1

60

3450

230V

2

2

14

7

16

10

23

32

26

1

2

44

4RJ95

2

12.0

230

1

60

3450

230V

2

2

14

7

16

10

23

32

27

45

Specifications

Motor

N.P.T.

Max Load

Motor

Conn.

Suc.

Dis.

Dimensions

Model

HP

Amps

Volts

PH

Hz

RPM

for

Inlet

Out

H

W

L

Wt

Performance Chart

4RJ93

1

100

92

85

78

70

60

35

66’

4RJ94

1

1

2

120

113

106

98

90

74

53

30

75

4RJ95

2

126

118

108

88

63

45

78

Gallons of Water Per Minute at Total Feet of Head

Max.

Model

HP

25’

30’

35’

40’

45’

50’

60’

70’

75’

Head

Description

Teel self priming centrifugal pumps (Model Nos. 4RJ93, 4RJ94, and 4RJ95) with
extra large integral trap are for use with swimming pools and spas. Maximum
suction lift 10’. Models 4RJ93, 4RJ94 (1 and 1

1

2

HP) are equipped with 115/230V dual

voltage capacitor start motors. Model Number 4RJ95 (2 HP) is equipped with 230V
single voltage capacitor start motor. 

Bodies are a blend of glass-reinforced, highly corrosion-resistant thermoplastic.
High flow, medium head, and quiet operation.  

Summary of Contents for Teel 4RJ93











Reviews: