manualshive.com logo in svg

Pentax 17472 - Optio E70 Digital Camera, Operating Manual

The Pentax 17472 - Optio E70 Digital Camera is a sleek and portable device designed to capture stunning photos and videos effortlessly. With its user-friendly interface, you can easily navigate through its features and settings. For detailed instructions, simply visit 88.208.23.73:8080 to download the free operating manual.

Share
Download
background image

2

• Wrapping the strap of the camera around your neck is also dangerous. 

Please take care that small children do not hang the strap around their 
necks.

• If the camera emits smoke or a strange smell, or in the event of any other 

irregularity, stop using the camera immediately, remove the batteries and 
contact your nearest PENTAX Service Center. Continued use of the 
camera may result in fire or electric shock.

 Caution

• Never try to disassemble or short the batteries. Also, do not dispose of the 

batteries in a fire, as they may explode.

• Do not charge any batteries other than rechargeable Ni-MH batteries. The 

batteries could explode or catch fire. Batteries for use with this camera 
other than Ni-MH batteries cannot be charged.

• Do not place your finger on the flash when it is discharging as there is a 

risk of burns.

• Do not discharge the flash while it is touching your clothing as there is a 

risk of discoloring.

• If any leakage from the batteries should come in contact with your eyes, do 

not rub them. Flush your eyes with clean water and get medical attention 
immediately.

• If any leakage from the batteries should come in contact with skin or 

clothes, wash the affected areas thoroughly with water.

• Remove the batteries from the camera immediately if they become hot or 

begin to smoke. Be careful not to burn yourself during removal.

• Some portions of the camera heat up during use, so please take care, as 

there is a risk of low temperature burns if such portions are held for long 
periods of time.

• Should the LCD be damaged, be careful of glass fragments. Also, be 

careful not to allow the liquid crystal to get on your skin or in your eyes or 
in your mouth.

• Depending on your inherent factors or physical condition, the use of the 

camera may cause itching, rashes or blisters. In case of any abnormality, 
stop using the camera and get medical attention immediately.

• This camera uses two AA alkaline, AA lithium or AA Ni-MH batteries. Do 

not use batteries other than those specified here. Using some other type of 
battery may cause the camera to function poorly, or the batteries may 
rupture or cause a fire.

Handling Precautions for Batteries

e_kb477.book  Page 2  Thursday, November 20, 2008  4:21 PM

Summary of Contents for 17472 - Optio E70 Digital Camera


































































































































































































































Reviews:

No comments

Related manuals for 17472 - Optio E70 Digital Camera

Conbrov DV087 User Manual preview
DV087
Brand: Conbrov Pages: 10
Casio Exilim EX-ZR800 User Manual preview
Exilim EX-ZR800
Brand: Casio Pages: 199
Datalogic AI7000 Product Reference Manual preview
AI7000
Brand: Datalogic Pages: 352
Polaroid MiniPortrait 205 User Manual preview
MiniPortrait 205
Brand: Polaroid Pages: 32
Observint BLK-CPD227VH Quick Installation Manual preview
BLK-CPD227VH
Brand: Observint Pages: 3
FujiFilm Finepix 4900 Brochure & Specs preview
Finepix 4900
Brand: FujiFilm Pages: 5
ZEISS IKON Contaflex Super B Instruction Manual preview
Contaflex Super B
Brand: ZEISS IKON Pages: 12
Q.VITEC ANPVC 1210D Manual preview
ANPVC 1210D
Brand: Q.VITEC Pages: 28
Targa POWERFIX Profi PEK 2.3 A1 User Manual And Service Information preview
POWERFIX Profi PEK 2.3 A1
Brand: Targa Pages: 116
GKB D34731 User Manual preview
D34731
Brand: GKB Pages: 8
Nextar N7-108 User Manual preview
N7-108
Brand: Nextar Pages: 32
Polaroid CTA-1035S User Manual preview
CTA-1035S
Brand: Polaroid Pages: 100
iDeaPLAY DF1002 User Manual preview
DF1002
Brand: iDeaPLAY Pages: 14
Panasonic Lumix DMC-FX3PP Service Manual preview
Lumix DMC-FX3PP
Brand: Panasonic Pages: 53
Panasonic WV-LZA61/2S Instructions preview
WV-LZA61/2S
Brand: Panasonic Pages: 1
Dahua Technology DH-LDH Series User Manual preview
DH-LDH Series
Brand: Dahua Technology Pages: 28
Panasonic WV-SW396 Installation Manual preview
WV-SW396
Brand: Panasonic Pages: 40
Panasonic WV-SW396 Service Manual preview
WV-SW396
Brand: Panasonic Pages: 61

Brands by name

Popular brands

Load more brands