12
1
Getting Started
Powering the Camera
When using the camera for the first time or when the [Battery depleted.]
message is displayed, charge the battery.
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
3
Place the battery in the charger so that the PENTAX
name is visible.
The charging indicator lights red while the battery is charging and
changes to green when charging is completed.
4
When charging is completed, remove the battery from
the battery charger.
Charging the Battery
• The time required for full charge is about 100 minutes maximum.
The appropriate ambient temperature range for charging the
battery is 0°C-40°C (32°F to 104°F).
• The charging time may vary depending on the ambient
temperature and charging conditions.
• When the battery reaches the end of its service life, the time that
the camera can be operated becomes shorter even when the
battery is fully charged. In this event, replace the battery.
• Always charge the battery after purchasing or when it has not
been used for a long time.
• Do not use the battery charger D-BC8 to charge the battery other
than the rechargeable lithium-ion battery D-LI8, as the charger
may overheat or be damaged.
• If the battery is inserted correctly but the charging indicator fails to
light, the battery may be faulty. Replace with a new battery.
Charging indicator
Battery
To power outlet
Battery charger
AC plug cord
3
1
2