16
1
Getting Started
Installing the SD Memory Card / MultiMediaCard
This camera uses an SD Memory Card and MultiMediaCard. Captured
images are recorded on the SD Memory Card / MultiMediaCard if a card
is inserted ( icon on the LCD monitor), or in the Built-in memory if no
card is inserted (
icon on the LCD monitor). Make sure that the
camera is turned off before inserting or removing the SD Memory Card /
MultiMediaCard.
1
Open the battery/card cover.
2
Insert SD Memory Card / MultiMediaCard so the label
(the side with the
2
symbol) is facing toward the LCD
monitor and push the card in until it clicks.
3
Close the battery/card cover.
To remove the card, eject the card by pressing it in the direction
indicated by the arrow and pull it out.
• Approximate Number of Recordable Images and Recorded pixels/
Quality levels
• The above table indicates the number of images when using a 16MB SD
Memory Card.
• The above table is based on standard shooting conditions specified by
PENTAX and may vary depending on the subject, shooting conditions, capture
mode, SD Memory Card, etc.
Quality Level
Best
Better
Good
Movie images
Recorded Pixels
C
D
E
(320 × 240)
2304 × 1728
5
9
14
60 sec × 1
1600 × 1200
11
20
28
1024 × 768
26
47
62
640 × 480
57
89
119
Battery/Card
cover
SD Memory Card / MultiMediaCard
To remove the
card, push and
pull out