28
28
d.
Bayonet Type (DA 21mm f/3.2 AL Limited dedicated lens hood)
When attaching the lens hood, align the index on the lens hood with the attaching index on the lens,
and push both parts straight toward each other. Attach the lens hood on the lens by turning the hood
in a clockwise direction, as seen from the front of the lens, until it stops.
"
Memo:
•
Vignetting occurs if the camera is used while the hood is not completely attached.
•
The dedicated lens hood cannot be attached if a filter is attached to the front of the lens. To use a
filter and the dedicated lens hood together, attach a 43mm diameter filter to the back of the hood.
(Refer to page 33)
d
Lens hood
attaching
index
e_kl577_17.fm Page 28 Friday, June 27, 2008 3:37 PM