42
(Preparation of Flash Unit Attached to Camera)
Firstly, set the wireless mode and channel of the
flash unit attached to the camera, and register
them on the camera.
Attach the AF540FGZ to the hot shoe of the
camera after turning the camera off.
Set the power switch of the flash unit to
(WIRELESS).
Press the wireless mode button (M/C/S) the
number of times required to display CONTROL
on the LCD panel.
Slide down the setting switch to the (yellow
dot) to display the channel on the LCD panel.
Press the channel button (CH) and select a
channel from 1CH to 4CH.
Slide the setting switch back up to the (white
dot).
When Attaching the AF540FGZ to the Camera for Control Flash
Main flash
Control flash only: not
used for main flash
1
00_AF540FGZ.book Page 42 Monday, April 10, 2006 11:42 AM