1
In
troduc
tion
11
9
Live View/Delete button (
K
/
L
)
Displays the Live View image. (p.47)
In playback mode, press to delete images. (p.48)
0
Rear e-dial (
R
)
Changes the values for camera settings such as exposure.
(p.52)
You can change the menu tabs when a menu screen is
displayed. (p.22)
You can change camera settings when the control panel is
displayed. (p.20)
In playback mode, use this to magnify the image or display
multiple images at the same time. (p.48, p.84)
a
Four-way controller (
ABCD
)
Displays the Sensitivity, White Balance, Flash Mode or
Drive Mode setup menu. (p.20)
When a menu or the control panel is displayed, use this to
move the cursor or change the item to set.
Press
B
in single image display of the playback mode to
display the playback mode palette. (p.83)
b
INFO button (
G
)
Changes the style of the display on the monitor. (p.12, p.16)
c
Mode dial
Changes the capture mode. (p.45, p.50)
d
Wi-Fi/Fx2 button (
Y
)
You can assign a function to this button. (p.106)
In playback mode, press to turn the Wi-Fi function on or off.
(p.96)
e
AF/AE Lock button (
f
)
Available for adjusting focus, instead of pressing
0
halfway, and for locking the exposure value before shooting.
(p.53, p.61)
f
Playback button (
3
)
Switches to playback mode. (p.47) Press the button again to
switch to capture mode.
g
OK button (
E
)
When a menu or the control panel is displayed, press this
button to confirm the selected item.
Press and hold this button when [AF Active Area] is set to
9
or
8
, or to
0
or
h
to switch the function of the arrow
keys to the AF area change mode or the direct key operation
mode. (p.62, p.64)
h
MENU button (
F
)
Displays a menu. Press this button while the menu is
displayed to return to the previous screen. (p.22)
About the Main Switch Lamp
The main switch lamp turns off in the following situations.
• From the time when
0
is pressed halfway until the
end of shooting
• During Interval Shooting
• During Optical Preview
• During playback mode
• While a menu is displayed
• During Auto Power Off
You can set the lamp illumination setting in [Other Indicator
Lamps] of [Indicator Lamps] in the
D
2 menu. (p.110)
About the Four-way Controller
In this manual, each button of the four-
way controller is indicated as shown in
the illustration on the right.