Installation instructions
METAL COLUMN LOUDSPEAKER
MCS20/TC
98
3
6
8
TOP
Top cover
unit: mm
Front View
Volume control location on base
1. Remove the top cover of the unit (cable gland end) and connect the 100 volt line input cable
into the ceramic terminal block through the cable gland provided.
2. On removing the top cover of the loudspeaker you will observe a three way terminal block that
is connected to the 100 volt line transformer, as this unit is provided with a selector switch located
at the base of the column) insert the 100 volt line cable using the red wire to the red and
black to black cable connections.
Three way ceramic terminal block
Cont/d
Top view of column loudspeaker with lid off
