Quick Start Guide V2.016_2 (V30 Plus).Docx 29/07/2019
Page
17
of
19
V30 Plus Procedure:
1)
To
Clock In
press the “
YES/IN
”.
2)
To
Clock Out
press the “
NO/OUT
”.
3)
The Scanner will now display “
IN ENTRY
” on the first line and “
ENTER ID NO.
” on
the second line of the LCD display.
4)
Enter your ID on the keypad.
5)
The Scanner will now prompt you to place your designated finger on the
sensor plate.
6)
Place your correct finger firmly on the sensor plate and wait for the V90 to display
“
REMOVE FINGER
”.
7)
If successful the V30 Plus will now display the word “
VERIFIED
” as well as light
up the green LED.
8)
If unsuccessful the V30 Plus will request you to “
PLEASE TRY AGAIN
”.
Two further failures will result in the V30 Plus displaying the word
“
UNSUCCESSFUL
” as well as light up the red LED.
Handy Hints:
1)
Ensure that you type in your employee number correctly.
2)
Always read the screen on the device. It displays the information required at each
step.
3)
Place finger correctly on the scanning pad.
4)
If your finger is cracked and dry, rub it in the palm of your opposite hand to coat it
with your natural skin oils.
I have injured my default finger, how do I use my alternative finger?
Once you have pressed the Clock in or Clock out button and entered your employee
number, press the
“*”
key. The device will then prompt you to scan your alternative
finger on the screen if enrolled.
